Impact tester PCE-DD A

Finger impact tester for indicative measurement of Shore A / Easy-to-read LCD screen / Resolution 0.5 degrees of hardness

This Finger Impact Tester is a compact Shore A hardness tester, designed for measuring materials of similar hardness to soft rubber, elastomers or other soft plastics.

The finger impact tester uses a 35º cone-shaped punch. The punch is positioned 2.5 mm away from the bearing surface. In this case, the finger impact tester indicates the value 0. The measurement of Shore A hardness requires the application of a force of 1000 g (12.5 N).

It is necessary that the samples checked face at least 6 mm in thickness so that the measurement is done correctly. If the samples are less than 6 mm thick, the samples must be stacked (for example, 3 samples with a thickness of 2 mm each can be stacked at 6 mm).

– Shore A
– Portable device
– Digital LCD screen
– Delivered with a case
– Easy to use