PCE-MPC 25 particle analyzer

6-channel particle analyzer for indicative measurements / Setting of limit values ​​/ Data logging / Micro USB interface / Range: 0 … 1000 µg/m³ / Mass concentration / Battery life approx. 9 hours / LCD color display 3.2″ / Carrying case / 1/4″ thread for tripod mounting

This particle analyzer is used in offices and workshops as well as in laboratories, to carry out indicative measurements. The particle analyzer determines the number of particles and the mass concentration PM2.5 and PM10 over a range between 0 and 1000 µg / m³. In addition, it measures ambient temperature and humidity. The particle analyzer alarm setting function is used for PM 2.5.

During the measurement, the particle analyzer can save the measurement values. The particle analyzer has a memory for 12 measurement series. Each series includes 999 measurement points. You can adjust the sample rate. Once the recording is complete, you can transfer the data from the particle analyzer to the computer. The particle analyzer incorporates a micro USB interface which allows it to be connected to any PC. As the computer recognizes the particle analyzer as an external memory, you can connect it to any operating system. The backed up data is saved in PDF format.

The micro USB interface serves, in addition to data transfer, to charge the 8 Wh battery. The particle analyzer battery lasts approximately 9 hours. Thanks to this, you can use the particle analyzer for a working day. As the battery is not permanently installed in the particle analyzer, you can easily change it.

– Particle counter: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 / 10 µm
– Mass concentration range: 0 … 1000 µm/m³
– Data logging
– Setting of limit values ​​with alarm
– Case for safe transport
– Ideal for indicative measurements
– Micro USB interface